i2c: spacemit: fix detect issue
[ Upstream commit 25faa5364638b86ec0d0edb4486daa9d40a0be8f ]
This commit addresses two issues causing i2c detect to fail.
The identified issues are:
1. Incorrect error handling for BED (Bus Error No ACK/NAK):
Before this commit, Both ALD (Arbitration Loss Detected) and
BED returned -EAGAIN.
2. Missing interrupt status clear after initialization in xfer():
On the K1 SoC, simply fixing the first issue changed the error
from -EAGAIN to -ETIMEOUT. Through tracing, it was determined that
this is likely due to MSD (Master Stop Detected) latency issues.
That means the MSD bit in the ISR may still be set on the next transfer.
As a result, the controller won't work — we can see from the scope that
it doesn't issue any signal.
(This only occurs during rapid consecutive I2C transfers.
That explains why the issue only shows up with i2cdetect.)
With these two fixes, i2c device detection now functions correctly on the K1 SoC.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251113-fix-k1-detect-failure-v2-1-b02a9a74f65a@linux.spacemit.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
581a9f4c1c
commit
bfef208916
|
|
@ -158,11 +158,16 @@ static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c)
|
|||
{
|
||||
dev_dbg(i2c->dev, "i2c error status: 0x%08x\n", i2c->status);
|
||||
|
||||
if (i2c->status & (SPACEMIT_SR_BED | SPACEMIT_SR_ALD)) {
|
||||
/* Arbitration Loss Detected */
|
||||
if (i2c->status & SPACEMIT_SR_ALD) {
|
||||
spacemit_i2c_reset(i2c);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
/* Bus Error No ACK/NAK */
|
||||
if (i2c->status & SPACEMIT_SR_BED)
|
||||
spacemit_i2c_reset(i2c);
|
||||
|
||||
return i2c->status & SPACEMIT_SR_ACKNAK ? -ENXIO : -EIO;
|
||||
}
|
||||
|
||||
|
|
@ -224,6 +229,12 @@ static void spacemit_i2c_check_bus_release(struct spacemit_i2c_dev *i2c)
|
|||
}
|
||||
}
|
||||
|
||||
static inline void
|
||||
spacemit_i2c_clear_int_status(struct spacemit_i2c_dev *i2c, u32 mask)
|
||||
{
|
||||
writel(mask & SPACEMIT_I2C_INT_STATUS_MASK, i2c->base + SPACEMIT_ISR);
|
||||
}
|
||||
|
||||
static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c)
|
||||
{
|
||||
u32 val;
|
||||
|
|
@ -267,12 +278,8 @@ static void spacemit_i2c_init(struct spacemit_i2c_dev *i2c)
|
|||
val = readl(i2c->base + SPACEMIT_IRCR);
|
||||
val |= SPACEMIT_RCR_SDA_GLITCH_NOFIX;
|
||||
writel(val, i2c->base + SPACEMIT_IRCR);
|
||||
}
|
||||
|
||||
static inline void
|
||||
spacemit_i2c_clear_int_status(struct spacemit_i2c_dev *i2c, u32 mask)
|
||||
{
|
||||
writel(mask & SPACEMIT_I2C_INT_STATUS_MASK, i2c->base + SPACEMIT_ISR);
|
||||
spacemit_i2c_clear_int_status(i2c, SPACEMIT_I2C_INT_STATUS_MASK);
|
||||
}
|
||||
|
||||
static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c)
|
||||
|
|
|
|||
Loading…
Reference in New Issue