Unlike ata_std_prereset() and ata_std_postreset(), the function
sata_std_hardreset() applies only to SATA devices, as its name implies.
So move its definition to libata-sata.c.
Together with this, also move the definition of sata_port_ops to
libata-sata.c, where it belongs.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Move the definition of the function sata_down_spd_limit() to
libata-sata.c where it belongs, together with sata_set_spd().
The helper function ata_sstatus_online() is also changed to be an
inline function defined in drivers/ata/libata.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
The function __ata_qc_complete() is always called with a qc that already
has been dereferenced and so is guaranteed to be non-NULL (as otherwise
the kernel would have crashed). So remove the warning for a NULL qc as
it is useless.
Furthermore, the qc passed to __ata_qc_complete() must always be marked
as active with the ATA_QCFLAG_ACTIVE flag. If that is not the case, in
addition to the existing warning, return early so that we do not attempt
to complete an invalid qc.
Finally, fix the comment related to clearing the qc active flag as that
operation applies to all devices, not just ATAPI ones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Move the ATA link transport device related functions after the ATA
transport device related functions to avoid the need for forward
declaring ata_tdev_add() and ata_tdev_delete().
And while at it, do the following:
1) Change ata_is_ata_dev() and ata_is_link() to return a boolean
2) Fix a pointer declaration style in ata_is_ata_dev()
3) Improve the kdoc comments for ata_tdev_free(), ata_tdev_delete(),
ata_tdev_add(), ata_tlink_delete() and ata_tlink_add()
No functional changes are introduced by this cleanup.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Every time I see libata code calling scsi_check_sense(), I get confused
why the code path that is working fine for SCSI code, is not sufficient
for libata code.
The reason is that SCSI usually gets the sense data as part of the
completion, and will thus automatically call scsi_check_sense(), which
will set the SCSI ML byte (if any).
However, for libata queued commands, we always need to fetch the sense
data via SCSI EH, and thus do not get the luxury of having
scsi_check_sense() called automatically.
Add a new helper, ata_eh_decide_disposition(), that has a ata_eh_ prefix
to more clearly highlight that this is only needed for code called by EH,
while also having a similar name to scsi_decide_disposition(), such that
it is easier to compare the libata code with the equivalent SCSI code.
Also add a big kdoc comment explaining why this helper is called/needed in
the first place.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247e ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").
Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing
in pata-macio since commit 09fe2bfa6b ("ata: pata_macio: Fix
max_segment_size with PAGE_SIZE == 64K").
For example:
kernel BUG at drivers/ata/pata_macio.c:544!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac
...
NIP pata_macio_qc_prep+0xf4/0x190
LR pata_macio_qc_prep+0xfc/0x190
Call Trace:
0xc1421660 (unreliable)
ata_qc_issue+0x14c/0x2d4
__ata_scsi_queuecmd+0x200/0x53c
ata_scsi_queuecmd+0x50/0xe0
scsi_queue_rq+0x788/0xb1c
__blk_mq_issue_directly+0x58/0xf4
blk_mq_plug_issue_direct+0x8c/0x1b4
blk_mq_flush_plug_list.part.0+0x584/0x5e0
__blk_flush_plug+0xf8/0x194
__submit_bio+0x1b8/0x2e0
submit_bio_noacct_nocheck+0x230/0x304
btrfs_work_helper+0x200/0x338
process_one_work+0x1a8/0x338
worker_thread+0x364/0x4c0
kthread+0x100/0x104
start_kernel_thread+0x10/0x14
That commit increased max_segment_size to 64KB, with the justification
that the SCSI core was already using that size when PAGE_SIZE == 64KB,
and that there was existing logic to split over-sized requests.
However with a sufficiently large request, the splitting logic causes
each sg to be split into two commands in the DMA table, leading to
overflow of the DMA table, triggering the BUG_ON().
With default settings the bug doesn't trigger, because the request size
is limited by max_sectors_kb == 1280, however max_sectors_kb can be
increased, and apparently some distros do that by default using udev
rules.
Fix the bug for 4KB kernels by reverting to the old max_segment_size.
For 64KB kernels the sg_tablesize needs to be halved, to allow for the
possibility that each sg will be split into two.
Fixes: 09fe2bfa6b ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K")
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Closes: https://lore.kernel.org/all/62d248bb-e97a-25d2-bcf2-9160c518cae5@kolla.no/
Reported-by: Jonáš Vidra <vidra@ufal.mff.cuni.cz>
Closes: https://lore.kernel.org/all/3b6441b8-06e6-45da-9e55-f92f2c86933e@ufal.mff.cuni.cz/
Tested-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
This reverts commit 28ab976911.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab976911 ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab976911 ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The RXWM(RxWaterMark) sets the minimum number of free location within
the RX FIFO before the watermark is exceeded which in turn will cause
the Transport Layer to instruct the Link Layer to transmit HOLDS to the
transmitting end.
Based on the default RXWM value 0x20, RX FIFO overflow might be observed
on i.MX8QM MEK board, when some Gen3 SATA disks are used.
The FIFO overflow will result in CRC error, internal error and protocol
error, then the SATA link is not stable anymore.
To fix this issue, enlarge RX water mark setting from 0x20 to 0x29.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
i.MX8QM AHCI SATA doesn't need set AHB clock rate to config the vendor
specified TIMER1MS register.
Set AHB clock rate only for i.MX53 and i.MX6Q.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Clean up code by using PHY interface provided by the PHY driver under
PHY subsystem(drivers/phy/freescale/phy-fsl-imx8qm-hsio.c).
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/1723428055-27021-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
In ata_dev_print_quirks(), return early if ata_dev_print_info() returns
false or if we already printed quirk information. This is to avoid
printing a device quirks multiple times (that is, each time
ata_dev_revalidate() is called).
To remember if ata_dev_print_quirks() was already executed, define the
EH context flag ATA_EHI_DID_PRINT_QUIRKS and set this flag in
ata_dev_print_quirks().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 58157d607a ("ata: libata: Print quirks applied to devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
The function ata_noop_qc_prep(), as its name implies, does nothing and
simply returns AC_ERR_OK. For drivers that do not need any special
preparations of queued commands, we can avoid having to define struct
ata_port qc_prep operation by simply testing if that operation is
defined or not in ata_qc_issue(). Make this change and remove
ata_noop_qc_prep().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rename the function hpt_dma_blacklisted() to the more neutral
hpt_dma_broken().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Remove the use of the term "blacklist". What the comment using that term
refers to does not seem to exist at all anyway as the driver does not
have such list but rather only a list of compatible controllers.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Remove the comment using the term "blacklist" from piix_init_sidpr().
That comment is useless given that the function piix_no_sidpr() name is
clear about what is being checked.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rephrase the comment for the eMachines entry in the sysids array of
ahci_broken_suspend() to not use the term blacklist.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.
While at it, also constify the values of the csb_bad_ata100 array.
Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Introduce the function ata_dev_print_quirks() to print the quirk flags
that will be applied to a scanned device. This new function is called
from ata_dev_quirks() when a match on a device model or device model
and revision is found for a device in the __ata_dev_quirks array.
To implement this function, the ATA_QUIRK_ flags are redefined using
the new enum ata_quirk which defines the bit shift for each quirk
flag. The array of strings ata_quirk_names is used to define the name
of each flag, which are printed by ata_dev_print_quirks().
Example output for a device listed in the __ata_dev_quirks array and
which has the ATA_QUIRK_DISABLE flag applied:
[10193.461270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10193.469190] ata1.00: Model 'ASMT109x- Config', rev '2143 5', applying quirks: disable
[10193.469195] ata1.00: unsupported device, disabling
[10193.481564] ata1.00: disable device
enum ata_quirk also defines the __ATA_QUIRK_MAX value as one plus the
last quirk flag defined. This value is used in ata_dev_quirks() to add a
build time check that all quirk flags fit within the unsigned int
(32-bits) quirks field of struct ata_device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.
The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
array of these structures defining quirks for known devices is
renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()
And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Rename the function ata_dma_blacklisted() to ata_dev_nodma() as this new
name is more neutral. The function signature is also changed to return a
boolean instead of an int.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Change the function ata_dev_knobble() to return a boolean instead of a
u8.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
- ATA PASS-THROUGH sense data cleanups and fixes. (from Igor Pylypiv)
Highlights:
Store the sense data for ATA PASS-THROUGH commands at the correct offset
in the sense buffer when using fixed format sense data.
Cleanup the logic related to generating sense data for PASS-THROUGH
commands. Generating sense data for PASS-THROUGH commands would
overwrite any eventual (real) sense data received from the device.
Honor the D_SENSE bit when generating sense data for PASS-THROUGH
commands. (The D_SENSE bit can be set by the user, and determines if
the returned sense data should be in fixed format or descriptor format.)
- ata port allocation cleanups. (from me)
Highlights:
Assign the ata port print_id at port allocation time, such that the
ata_port_* print functions can be used earlier in the init call chain.
Change the ata port port print_id to use ida_alloc(), such that
print_ids will get reused on rmmod + modprobe, instead of being
incremented indefinitely.
Remove wrappers that only existed in order to export the internal libata
functions which they wrapped, and instead export the libata functions
directly.
- Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm.
Using this default was not always a good idea before, because it would
break hot plug support. However, with LPM changes in recent kernels,
a port marked as external will not enable LPM (in order to not break hot
plug), so it is now safe to change the default value of this Kconfig.
All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
med_power_with_dipm for quite a long time. (from Mario Limonciello)
- Convert ahci-fsl-qoriq device tree binding to yaml format.
(from Frank Li)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZpZkrAAKCRDJZDGjmcZN
cr/YAP98wiT4VCiEb1iQBShyYYaxpEiVUPtpHCIa+uLC56IZkgEAvAx9fbwF9uJy
2VQS1+x03Ui0W+b2irMJcYbTnhXjmQk=
=HOH5
-----END PGP SIGNATURE-----
Merge tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv)
Store the sense data for ATA PASS-THROUGH commands at the correct
offset in the sense buffer when using fixed format sense data.
Cleanup the logic related to generating sense data for PASS-THROUGH
commands. Generating sense data for PASS-THROUGH commands would
overwrite any eventual (real) sense data received from the device.
Honor the D_SENSE bit when generating sense data for PASS-THROUGH
commands. (The D_SENSE bit can be set by the user, and determines if
the returned sense data should be in fixed format or descriptor
format)
- ata port allocation cleanups (me)
Assign the ata port print_id at port allocation time, such that the
ata_port_* print functions can be used earlier in the init call
chain.
Change the ata port port print_id to use ida_alloc(), such that
print_ids will get reused on rmmod + modprobe, instead of being
incremented indefinitely.
Remove wrappers that only existed in order to export the internal
libata functions which they wrapped, and instead export the libata
functions directly.
- Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm
(Mario Limonciello)
Using this default was not always a good idea before, because it
would break hot plug support. However, with LPM changes in recent
kernels, a port marked as external will not enable LPM (in order to
not break hot plug), so it is now safe to change the default value of
this Kconfig.
All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
med_power_with_dipm for quite a long time
- Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li)
* tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci
ata: ahci: Add debug print for external port
ata,scsi: Remove wrapper ata_sas_port_alloc()
ata: libata-core: Reuse available ata_port print_ids
ata: libata: Assign print_id at port allocation time
ata: libata-core: Remove local_port_no struct member
ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc()
ata: libata-core: Remove support for decreasing the number of ports
ata: libata: Remove unused function declaration for ata_scsi_detect()
ata,scsi: Remove wrappers ata_sas_tport_{add,delete}()
ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf
ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()
ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()
ata: libata-scsi: Remove redundant sense_buffer memsets
ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error
ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1
ata: libata-scsi: Fix offsets for the fixed format sense data
dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format
ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Add a debug print that tells us if LPM is not getting enabled because the
port is external.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-20-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The ata_sas_port_alloc() wrapper mainly exists in order to export the
internal libata function which it wraps. The secondary reason is that
it initializes some ata_port struct members.
However, ata_sas_port_alloc() is only used in a single location,
sas_ata_init(), which already performs some ata_port struct member
initialization, so it does not make sense to spread this initialization
out over two separate locations.
Thus, remove the wrapper and instead export the libata function directly,
and move the libsas specific ata_port initialization to sas_ata_init(),
which already does some ata_port initialization.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-19-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Currently, the ata_port print_ids are increased indefinitely, even when
there are lower ids available.
E.g. on first boot you will have ata1-ata6 assigned.
After a rmmod + modprobe, you will instead have ata7-ata12 assigned.
Move to use the ida_alloc() API, such that print_ids will get reused.
This means that even after a rmmod + modprobe, the ports will be assigned
print_ids ata1-ata6.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-18-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
While the assignment of ap->print_id could have been moved to
ata_host_alloc(), let's simply move it to ata_port_alloc().
If you allocate a port, you want to give it a unique name that can be used
for printing.
By moving the ap->print_id assignment to ata_port_alloc(), means that we
can also remove the ap->print_id assignment from ata_sas_port_alloc().
This will allow a LLD to use the ata_port_*() print functions before
ata_host_register() has been called.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-17-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ap->local_port_no is simply ap->port_no + 1.
Since ap->local_port_no can be derived from ap->port_no, there is no need
for the ap->local_port_no struct member, so remove ap->local_port_no.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-16-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ata_sas_port_alloc() calls ata_port_alloc() which already assigns ap->lock
so there is no need for ata_sas_port_alloc() to assign it again.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-15-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit f31871951b ("libata: separate out ata_host_alloc() and
ata_host_register()") added ata_host_alloc(), where the API allowed
a LLD to overallocate the number of ports supplied to ata_host_alloc(),
as long as the LLD decreased host->n_ports before calling
ata_host_register().
However, this functionally has never ever been used by a single LLD.
Because of the current API design, the assignment of ap->print_id is
deferred until registration time, which is bad, because that means that
the ata_port_*() print functions cannot be used by a LLD until after
registration time, which means that a LLD is forced to use a print
function that is non-port specific, even for a port specific error.
Remove the support for decreasing the number of ports, such that it will
be possible to assign ap->print_id earlier.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-14-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The ata_sas_tport_add() and ata_sas_tport_delete() wrappers only exist in
order to export the internal libata functions which they wrap.
Remove the wrappers and instead export the libata functions directly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-12-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
'devmodel' hasn't actually been used since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qc->result_tf contents are only valid when the ATA_QCFLAG_RTF_FILLED flag
is set. The ATA_QCFLAG_RTF_FILLED flag should be always set for commands
that failed or for commands that have the ATA_QCFLAG_RESULT_TF flag set.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-8-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ATA_QCFLAG_RTF_FILLED is not specific to ahci and can be used generally
to check if qc->result_tf contains valid data.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-7-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ATA device id is not used in ata_to_sense_error().
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-6-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
SCSI layer clears sense_buffer in scsi_queue_rq() so there is no need for
libata to clear it again.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-5-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
SAT-5 revision 8 specification removed the text about the ANSI INCITS
431-2007 compliance which was requiring SCSI/ATA Translation (SAT) to
return descriptor format sense data for the ATA PASS-THROUGH commands
regardless of the setting of the D_SENSE bit.
Let's honor the D_SENSE bit for ATA PASS-THROUGH commands while
generating the "ATA PASS-THROUGH INFORMATION AVAILABLE" sense data.
SAT-5 revision 7
================
12.2.2.8 Fixed format sense data
Table 212 shows the fields returned in the fixed format sense data
(see SPC-5) for ATA PASS-THROUGH commands. SATLs compliant with ANSI
INCITS 431-2007, SCSI/ATA Translation (SAT) return descriptor format
sense data for the ATA PASS-THROUGH commands regardless of the setting
of the D_SENSE bit.
SAT-5 revision 8
================
12.2.2.8 Fixed format sense data
Table 211 shows the fields returned in the fixed format sense data
(see SPC-5) for ATA PASS-THROUGH commands.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Niklas Cassel <cassel@kernel.org>
Closes: https://lore.kernel.org/linux-ide/Zn1WUhmLglM4iais@ryzen.lan
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240702024735.1152293-4-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Current ata_gen_passthru_sense() code performs two actions:
1. Generates sense data based on the ATA 'status' and ATA 'error' fields.
2. Populates "ATA Status Return sense data descriptor" / "Fixed format
sense data" with ATA taskfile fields.
The problem is that #1 generates sense data even when a valid sense data
is already present (ATA_QCFLAG_SENSE_VALID is set). Factoring out #2 into
a separate function allows us to generate sense data only when there is
no valid sense data (ATA_QCFLAG_SENSE_VALID is not set).
As a bonus, we can now delete a FIXME comment in atapi_qc_complete()
which states that we don't want to translate taskfile registers into
sense descriptors for ATAPI.
Additionally, always set SAM_STAT_CHECK_CONDITION when CK_COND=1 because
SAT specification mandates that SATL shall return CHECK CONDITION if
the CK_COND bit is set.
The ATA PASS-THROUGH handling logic in ata_scsi_qc_complete() is hard
to read/understand. Improve the readability of the code by moving checks
into self-explanatory boolean variables.
Cc: stable@vger.kernel.org # 4.19+
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-3-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Correct the ATA PASS-THROUGH fixed format sense data offsets to conform
to SPC-6 and SAT-5 specifications. Additionally, set the VALID bit to
indicate that the INFORMATION field contains valid information.
INFORMATION
===========
SAT-5 Table 212 — "Fixed format sense data INFORMATION field for the ATA
PASS-THROUGH commands" defines the following format:
+------+------------+
| Byte | Field |
+------+------------+
| 0 | ERROR |
| 1 | STATUS |
| 2 | DEVICE |
| 3 | COUNT(7:0) |
+------+------------+
SPC-6 Table 48 - "Fixed format sense data" specifies that the INFORMATION
field starts at byte 3 in sense buffer resulting in the following offsets
for the ATA PASS-THROUGH commands:
+------------+-------------------------+
| Field | Offset in sense buffer |
+------------+-------------------------+
| ERROR | 3 |
| STATUS | 4 |
| DEVICE | 5 |
| COUNT(7:0) | 6 |
+------------+-------------------------+
COMMAND-SPECIFIC INFORMATION
============================
SAT-5 Table 213 - "Fixed format sense data COMMAND-SPECIFIC INFORMATION
field for ATA PASS-THROUGH" defines the following format:
+------+-------------------+
| Byte | Field |
+------+-------------------+
| 0 | FLAGS | LOG INDEX |
| 1 | LBA (7:0) |
| 2 | LBA (15:8) |
| 3 | LBA (23:16) |
+------+-------------------+
SPC-6 Table 48 - "Fixed format sense data" specifies that
the COMMAND-SPECIFIC-INFORMATION field starts at byte 8
in sense buffer resulting in the following offsets for
the ATA PASS-THROUGH commands:
Offsets of these fields in the fixed sense format are as follows:
+-------------------+-------------------------+
| Field | Offset in sense buffer |
+-------------------+-------------------------+
| FLAGS | LOG INDEX | 8 |
| LBA (7:0) | 9 |
| LBA (15:8) | 10 |
| LBA (23:16) | 11 |
+-------------------+-------------------------+
Reported-by: Akshat Jain <akshatzen@google.com>
Fixes: 11093cb1ef ("libata-scsi: generate correct ATA pass-through sense")
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-2-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f43 ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
We got another report that CT1000BX500SSD1 does not work with LPM.
If you look in libata-core.c, we have six different Crucial devices that
are marked with ATA_HORKAGE_NOLPM. This model would have been the seventh.
(This quirk is used on Crucial models starting with both CT* and
Crucial_CT*)
It is obvious that this vendor does not have a great history of supporting
LPM properly, therefore, add the ATA_HORKAGE_NOLPM quirk for all Crucial
BX SSD1 models.
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Alessandro Maggio <alex.tkd.alex@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240627105551.4159447-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
LPM consists of HIPM (host initiated power management) and DIPM
(device initiated power management).
ata_eh_set_lpm() will only enable HIPM if both the HBA and the device
supports it.
However, DIPM will be enabled as long as the device supports it.
The HBA will later reject the device's request to enter a power state
that it does not support (Slumber/Partial/DevSleep) (DevSleep is never
initiated by the device).
For a HBA that doesn't support any LPM states, simply don't set a LPM
policy such that all the HIPM/DIPM probing/enabling will be skipped.
Not enabling HIPM or DIPM in the first place is safer than relying on
the device following the AHCI specification and respecting the NAK.
(There are comments in the code that some devices misbehave when
receiving a NAK.)
Performing this check in ahci_update_initial_lpm_policy() also has the
advantage that a HBA that doesn't support any LPM states will take the
exact same code paths as a port that is external/hot plug capable.
Side note: the port in ata_port_dbg() has not been given a unique id yet,
but this is not overly important as the debug print is disabled unless
explicitly enabled using dynamic debug. A follow-up series will make sure
that the unique id assignment will be done earlier. For now, the important
thing is that the function returns before setting the LPM policy.
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240618152828.2686771-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The SCSI Removable Media Bit (RMB) should only be set for removable media,
where the device stays and the media changes, e.g. CD-ROM or floppy.
The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
but before that it was used to indicate that the device can have its media
removed (while the device stays).
Commit 8a3e33cf92 ("ata: ahci: find eSATA ports and flag them as
removable") introduced a change to set the RMB bit if the port has either
the eSATA bit or the hot-plug capable bit set. The reasoning was that the
author wanted his eSATA ports to get treated like a USB stick.
This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
Expectations" which has since been integrated to SPC, which states that:
"""
Reports have been received that some USB Memory Stick device servers set
the removable medium (RMB) bit to one. The rub comes when the medium is
actually removed, because... The device server is removed concurrently
with the medium removal. If there is no device server, then there is no
device server that is waiting to have removable medium inserted.
Sufficient numbers of SCSI analysts see such a device:
- not as a device that supports removable medium;
but
- as a removable, hot pluggable device.
"""
The definition of the RMB bit in the SPC specification has since been
clarified to match this.
Thus, a USB stick should not have the RMB bit set (and neither shall an
eSATA nor a hot-plug capable port).
Commit dc8b4afc4a ("ata: ahci: don't mark HotPlugCapable Ports as
external/removable") then changed so that the RMB bit is only set for the
eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
reports of SATA devices were being automounted by udisks. However,
treating eSATA and hot-plug capable ports differently is not correct.
From the AHCI 1.3.1 spec:
Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
signal and power connectors are externally accessible via a joint signal
and power connector for blindmate device hot plug.
So a hot-plug capable port is an external port, just like commit
45b96d65ec ("ata: ahci: a hotplug capable port is an external port")
claims.
In order to not violate the SPC specification, modify the SCSI INQUIRY
data to only set the RMB bit if the ATA device can have its media removed.
This fixes a reported problem where GNOME/udisks was automounting devices
connected to hot-plug capable ports.
Fixes: 45b96d65ec ("ata: ahci: a hotplug capable port is an external port")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[cassel: wrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The pata_macio driver advertises a max_segment_size of 0xff00, because
the hardware doesn't cope with requests >= 64K.
However the SCSI core requires max_segment_size to be at least
PAGE_SIZE, which is a problem for pata_macio when the kernel is built
with 64K pages.
In older kernels the SCSI core would just increase the segment size to
be equal to PAGE_SIZE, however since the commit tagged below it causes a
warning and the device fails to probe:
WARNING: CPU: 0 PID: 26 at block/blk-settings.c:202 .blk_validate_limits+0x2f8/0x35c
CPU: 0 PID: 26 Comm: kworker/u4:1 Not tainted 6.10.0-rc1 #1
Hardware name: PowerMac7,2 PPC970 0x390202 PowerMac
...
NIP .blk_validate_limits+0x2f8/0x35c
LR .blk_alloc_queue+0xc0/0x2f8
Call Trace:
.blk_alloc_queue+0xc0/0x2f8
.blk_mq_alloc_queue+0x60/0xf8
.scsi_alloc_sdev+0x208/0x3c0
.scsi_probe_and_add_lun+0x314/0x52c
.__scsi_add_device+0x170/0x1a4
.ata_scsi_scan_host+0x2bc/0x3e4
.async_port_probe+0x6c/0xa0
.async_run_entry_fn+0x60/0x1bc
.process_one_work+0x228/0x510
.worker_thread+0x360/0x530
.kthread+0x134/0x13c
.start_kernel_thread+0x10/0x14
...
scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
Although the hardware can't cope with a 64K segment, the driver
already deals with that internally by splitting large requests in
pata_macio_qc_prep(). That is how the driver has managed to function
until now on 64K kernels.
So fix the driver to advertise a max_segment_size of 64K, which avoids
the warning and keeps the SCSI core happy.
Fixes: afd53a3d85 ("scsi: core: Initialize scsi midlayer limits before allocating the queue")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ce2bf6af-4382-4fe1-b392-cc6829f5ceb2@roeck-us.net/
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218858
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Tim Teichmann <teichmanntim@outlook.de>
Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Aarrayy <lp610mh@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Historically this was set to "keep_firmware_settings" to prevent problems
with power management on very old drives. However it's been observed that
almost all modern Linux distributions either set the policy to
"med_power_with_dipm" in the kernel configuration or update it to this via
userspace policy changes. Update the policy default in the kernel to
"med_power_with_dipm" to match that behavior as well.
Changing the default was previously not a good idea, because LPM disables
detection of hot plug removals, however, since commit ae1f3db006 ("ata:
ahci: do not enable LPM on external ports"), a port marked as external
will always be initialized to "keep_firmware_settings", regardless of the
SATA_MOBILE_LPM_POLICY Kconfig value. Therefore, changing the default is
now considered safe (external ports included).
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[cassel: rebased and reworded commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit b8b8b4e0c0 ("ata: ahci: Add Intel Alder Lake-P AHCI controller
to low power chipsets list") added Intel Alder Lake to the ahci_pci_tbl.
Because of the way that the Intel PCS quirk was implemented, having
an explicit entry in the ahci_pci_tbl caused the Intel PCS quirk to
be applied. (The quirk was not being applied if there was no explict
entry.)
Thus, entries that were added to the ahci_pci_tbl also got the Intel
PCS quirk applied.
The quirk was cleaned up in commit 7edbb60592 ("ahci: clean up
intel_pcs_quirk"), such that it is clear which entries that actually
applies the Intel PCS quirk.
Newer Intel AHCI controllers do not need the Intel PCS quirk,
and applying it when not needed actually breaks some platforms.
Do not apply the Intel PCS quirk for Intel Alder Lake.
This is in line with how things worked before commit b8b8b4e0c0 ("ata:
ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list"),
such that certain platforms using Intel Alder Lake will work once again.
Cc: stable@vger.kernel.org # 6.7
Fixes: b8b8b4e0c0 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list")
Signed-off-by: Jason Nader <dev@kayoway.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmZLzNIUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vwr/Q//STe2XGKI8bAKqP2wbbkzm+ISnK4A
Lqf3FEAIXunxDRspszfXKKV2p4vaIkmOFiwIdtp/kWvd0DQn5+ATXJ/iQtp8aFX/
R+6BQ7EZc2G7fN5fbQuK54+CvmWEpkKEMbXYbd6ivQ14Cijdb3Nbu+w+DYFjS+6C
k2a9lS1bTW7Xcy0fyiO1w6GQiWqtmOH8U3OlQtIrI0EVkDG9OG1LsLuc92/FgkOo
REN+sU+hX1K5fHrvm2CtjYDn/9/B6bJ/It22H1dPgUL9nKvKC67fYzosMtUCOX1M
6XSPjZIuXOmQGeZXHhpSlVwaidxoUjYO98I7nMquxKdCy6yct3geK7ULG/xeQCgD
ML7MGQB4+sTiSWalXUQaziKqF1FIDEvU3HMGXFWnoBL5l56eRp8KS1EI9Eqk9pU3
pk9fJaCkcFnkzPtMFzqPOm5q9zUZ6bGbfYb0hs72TUKplmVDhFo2T1YsW2AOyHZ7
mjuDzUYZX0H7uM1tntA56IgZX+oNOrLvhBt5L5M/BQeCsZFBBUfIcAEaYoL9LwXO
AYgIG3jdqzHHyAUzutJF+XHKinJLMHm0XVYbFmO6saPhFzrUJSNHqT7NzW1DGGTl
OnO8e1WNMX1EcnKvnc6fXyGmM3SgVwy45FsbG/zRnhn4uBKqKtjrh6uX/myA22LK
CSeqSUK9XmXxFNA=
=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
A few lines earlier pcim_enable_device() is called, which includes the
functionality of pci_enable_device_io(). Therefore we can safely remove the
call to pci_enable_device_io().
Link: https://lore.kernel.org/r/5068d0ce-2140-4d3f-b305-e8f0d61eed1f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
- Convert the bindings for the imx-pata and ahci-da850 drivers to DT
schemas (from Animesh).
- Correct the code to handle HAS_IOPORT dependencies and conditionally
compile drivers as needed (From Niklas).
- Correct the legacy_exit() function in the pata_legacy driver to
properly handle cleanups on driver exit (From Serget).
- Small code simplification removing the ata_exec_internal_sg()
function and folding it into its only caller (From me).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZkIUiwAKCRDdoc3SxdoY
dpYeAP4pECL0pY5R+4gk2kCfecYkR7yFg7c762/PK8WBH90clAD/WkcxjMIuuHA2
ra0d2eAfyj1sgJwbjkKrClQaUJGb3Qs=
=jzk4
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the bindings for the imx-pata and ahci-da850 drivers to DT
schemas (from Animesh)
- Correct the code to handle HAS_IOPORT dependencies and conditionally
compile drivers as needed (from Niklas)
- Correct the legacy_exit() function in the pata_legacy driver to
properly handle cleanups on driver exit (from Sergey)
- Small code simplification removing the ata_exec_internal_sg()
function and folding it into its only caller (from me)
* tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_legacy: make legacy_exit() work again
ata: libata-core: Remove ata_exec_internal_sg()
ata: add HAS_IOPORT dependencies
dt-bindings: ata: ahci-da850: Convert to dtschema
dt-bindings: ata: imx-pata: Convert to dtschema
Commit defc9cd826 ("pata_legacy: resychronize with upstream changes and
resubmit") missed to update legacy_exit(), so that it now fails to do any
cleanup -- the loop body there can never be entered. Fix that and finally
remove now useless nr_legacy_host variable...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: defc9cd826 ("pata_legacy: resychronize with upstream changes and resubmit")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Even though the command duration limits (CDL) feature was first added
in ACS-5 (major version 12), there are some ACS-4 (major version 11)
drives that implement CDL as well.
IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages
are mandatory in the ACS-4 standard so it should be safe to read these
log pages on older drives implementing the ACS-4 standard.
Fixes: 62e4a60e0c ("scsi: ata: libata: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commit 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
incorrectly handles failures of scsi_resume_device() in
ata_scsi_dev_rescan(), leading to a double call to
spin_unlock_irqrestore() to unlock a device port. Fix this by redefining
the goto labels used in case of errors and only unlock the port
scsi_scan_mutex when scsi_resume_device() fails.
Bug found with the Smatch static checker warning:
drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan()
error: double unlocked 'ap->lock' (orig line 4757)
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
ata_exec_internal() is the only caller of ata_exec_internal_sg() and
always calls this function with a single element scattergather list.
Remove ata_exec_internal_sg() and code it directly in
ata_exec_internal(), simplifying a little the sgl handling for the
command.
While at it, change the function signature to use the proper enum
dma_data_direction type for the dma_dir argument, cleanup comments
(capitalization and remove useless comments) and change the variable
auto_timeout type to a boolean.
No functional change.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-21-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-20-hch@lst.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-19-hch@lst.de
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commits 0077a504e1 ("ahci: asm1166: correct count of reported ports")
and 9815e39617 ("ahci: asm1064: correct count of reported ports")
attempted to limit the ports of the ASM1166 and ASM1064 AHCI controllers
to avoid long boot times caused by the fact that these adapters report
a port map larger than the number of physical ports. The excess ports
are "virtual" to hide port multiplier devices and probing these ports
takes time. However, these commits caused a regression for users that do
use PMP devices, as the ATA devices connected to the PMP cannot be
scanned. These commits have thus been reverted by commit 6cd8adc3e1
("ahci: asm1064: asm1166: don't limit reported ports") to allow the
discovery of devices connected through a port multiplier. But this
revert re-introduced the long boot times for users that do not use a
port multiplier setup.
This patch adds the mask_port_map ahci module parameter to allow users
to manually specify port map masks for controllers. In the case of the
ASMedia 1166 and 1064 controllers, users that do not have port
multiplier devices can mask the excess virtual ports exposed by the
controller to speedup port scanning, thus reducing boot time.
The mask_port_map parameter accepts 2 different formats:
- mask_port_map=<mask>
This applies the same mask to all AHCI controllers
present in the system. This format is convenient for small systems
that have only a single AHCI controller.
- mask_port_map=<pci_dev>=<mask>,<pci_dev>=mask,...
This applies the specified masks only to the PCI device listed. The
<pci_dev> field is a regular PCI device ID (domain🚌dev.func).
This ID can be seen following "ahci" in the kernel messages. E.g.
for "ahci 0000:01:00.0: 2/2 ports implemented (port mask 0x3)", the
<pci_dev> field is "0000:01:00.0".
When used, the function ahci_save_initial_config() indicates that a
port map mask was applied with the message "masking port_map ...".
E.g.: without a mask:
modprobe ahci
dmesg | grep ahci
...
ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
ahci 0000:00:17.0: (0000:00:17.0) 8/8 ports implemented (port mask 0xff)
With a mask:
modprobe ahci mask_port_map=0000:00:17.0=0x1
dmesg | grep ahci
...
ahci 0000:00:17.0: masking port_map 0xff -> 0x1
ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
ahci 0000:00:17.0: (0000:00:17.0) 1/8 ports implemented (port mask 0x1)
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Building with W=1 shows a warning for an unused variable when CONFIG_PCI
is diabled:
drivers/ata/sata_mv.c:790:35: error: unused variable 'mv_pci_tbl' [-Werror,-Wunused-const-variable]
static const struct pci_device_id mv_pci_tbl[] = {
Move the table into the same block that containsn the pci_driver
definition.
Fixes: 7bb3c5290c ("sata_mv: Remove PCI dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
In "struct st_ahci_drv_data", the 'ahci' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
PCI core in pci_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:
In file included from include/linux/string.h:369,
from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
97 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
620 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
1184 | memcpy(buffer, __io_virt(addr), size);
| ^~~~~~
The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.
Replace the complex calculation with a more readable min() variant
that avoids the warning.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Export libata NCQ Priority configuration helpers to be reused for libsas
managed SATA devices.
Switched locking from spin_lock_irq() to spin_lock_irqsave(). In the
future someone might call these helper functions when interrupts are
disabled. spin_unlock_irq() could lead to a premature re-enabling of
interrupts, whereas spin_unlock_irqrestore() restores the interrupt state
to its condition prior to the spin_lock_irqsave() call.
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240307214418.3812290-2-ipylypiv@google.com
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop
management") introduced the manage_system_start_stop scsi_device flag to
allow libata to indicate to the SCSI disk driver that nothing should be
done when resuming a disk on system resume. This change turned the
execution of sd_resume() into a no-op for ATA devices on system
resume. While this solved deadlock issues during device resume, this change
also wrongly removed the execution of opal_unlock_from_suspend(). As a
result, devices with TCG OPAL locking enabled remain locked and
inaccessible after a system resume from sleep.
To fix this issue, introduce the SCSI driver resume method and implement it
with the sd_resume() function calling opal_unlock_from_suspend(). The
former sd_resume() function is renamed to sd_resume_common() and modified
to call the new sd_resume() function. For non-ATA devices, this result in
no functional changes.
In order for libata to explicitly execute sd_resume() when a device is
resumed during system restart, the function scsi_resume_device() is
introduced. libata calls this function from the revalidation work executed
on devie resume, a state that is indicated with the new device flag
ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked
on resume, allowing normal operation.
Fixes: 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop management")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.
While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)
Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.
What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).
Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.
Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.
This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.
Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.
This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).
However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.
Fixes: 0077a504e1 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e39617 ("ahci: asm1064: correct count of reported ports")
Cc: stable@vger.kernel.org
Reported-by: Matt <cryptearth@googlemail.com>
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc.
- Add support for recognising the Power11 architected and raw PVRs.
- Add support for nr_cpus=n on the command line where the boot CPU is >= n.
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches.
- Other small features, cleanups and fixes.
Thanks to: Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming,
Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter
Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika
Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=K9Ok
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
by glibc
- Add support for recognising the Power11 architected and raw PVRs
- Add support for nr_cpus=n on the command line where the
boot CPU is >= n
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches
- Other small features, cleanups and fixes
Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.
* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
powerpc/macio: Make remove callback of macio driver void returned
powerpc/83xx: Fix build failure with FPU=n
powerpc/64s: Fix get_hugepd_cache_index() build failure
powerpc/4xx: Fix warp_gpio_leds build failure
powerpc/amigaone: Make several functions static
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
macintosh/adb: make adb_dev_class constant
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
powerpc/fsl: Fix mfpmr() asm constraint error
powerpc: Remove cpu-as-y completely
powerpc/fsl: Modernise mt/mfpmr
powerpc/fsl: Fix mfpmr build errors with newer binutils
powerpc/64s: Use .machine power4 around dcbt
powerpc/64s: Move dcbt/dcbtst sequence into a macro
powerpc/mm: Code cleanup for __hash_page_thp
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
powerpc/irq: Allow softirq to hardirq stack transition
powerpc: Stop using of_root
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
...
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled. (from me)
- Drop the board type board_ahci_low_power. Now when we make sure that we
won't enable LPM for external ports, we can always set the LPM policy to
CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is thus no
longer any need for the board type board_ahci_low_power, so it can be
removed. (As before, LPM features not supported by the HBA and/or the
device will not be enabled, regardless of the LPM policy Kconfig.)
(from Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we will
wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel platforms
use it. The Intel PCS quirk was being applied to basically all Intel
platforms, which caused some issues (the device failing to come back
after a reset), when being applied to newer Intel platforms where it
shouldn't have been applied. Add board type board_ahci_pcs_quirk and
make legacy Intel platforms use it. New platforms can be added using
board type board_ahci (which will not have the quirk applied).
(from me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more clearly
highlight that it applies two different quirks. (from me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk). (from me)
- Drop unused board_ahci_noncq board type. (from me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types. (from me)
- Make pata_parport_bus_type const. (from Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not used
by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema.
(from Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing the
maximum number of ports supported by the HBA silicon. (from me)
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZe70AhIcY2Fzc2VsQGtl
cm5lbC5vcmcACgkQyWQxo5nGTXJfQQD/TjC4nEAWRiV3qz0iqyXt89T7DZUGP7aP
AZDxv2ST0rAA/j2VK6G1VHoxxN3fghfCF+D8zCzZ8w/gsOqjKMvbIEoI
=sNec
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
Commit fc7a6209d5 ("bus: Make remove callback return void") forces
bus_type::remove be void-returned, it doesn't make much sense for any
bus based driver implementing remove callbalk to return non-void to
its caller.
This change is for macio bus based drivers.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/TYCP286MB232391520CB471E7C8D6EA84CAD19@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
We are currently printing the CAP.NP field.
CAP.NP is a 0's based value indicating the maximum number of ports
supported by the HBA silicon. Note that the number of ports indicated
in this field may be more than the number of ports indicated in the
PI (ports implemented) register. (See AHCI 1.3.1, section 3.1.1 -
Offset 00h: CAP – HBA Capabilities.)
PI (ports implemented) register is a field that has a bit set to '1'
if that specific port is implemented. This register is allowed to have
zeroes mixed with ones, i.e. a port in the middle is allowed to be
unimplemented. (See AHCI 1.3.1, section 3.1.4 - Offset 0Ch: PI – Ports
Implemented.)
Since the number of ports implemented might be smaller than the maximum
number of ports supported by the HBA silicon, print the number of
implemented ports as well.
While at it, clarify the properties being printed, and add a separator
(,), as that is currently missing, making it very easy to get confused
if the number before or after <property> belongs to <property>.
before:
ahci 0000:00:03.0: masking port_map 0x3f -> 0x2f
ahci 0000:00:03.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x2f impl SATA mode
ahci 0000:00:03.0: flags: 64bit ncq only
after:
ahci 0000:00:03.0: masking port_map 0x3f -> 0x2f
ahci 0000:00:03.0: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
ahci 0000:00:03.0: 5/6 ports implemented (port mask 0x2f)
ahci 0000:00:03.0: flags: 64bit ncq only
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
For regular system shutdown, ata_dev_power_set_standby() will be
executed twice: once the scsi device is removed and another when
ata_pci_shutdown_one() executes and EH completes unloading the devices.
Make the second call to ata_dev_power_set_standby() do nothing by using
ata_dev_power_is_active() and return if the device is already in
standby.
Fixes: 2da4c5e24e ("ata: libata-core: Improve ata_dev_power_set_active()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY
error path.
To fix introduce the function ceva_ahci_platform_enable_resources() which
is a customized version of ahci_platform_enable_resources() and inline with
SATA IP programming sequence it does:
- Assert SATA reset
- Program PS GTR phy
- Bring SATA by de-asserting the reset
- Wait for GT lane PLL to be locked
ceva_ahci_platform_enable_resources() is also used in the resume path
as the same SATA programming sequence (as in probe) should be followed.
Also cleanup the mixed usage of ahci_platform_enable_resources() and custom
implementation in the probe function as both are not required.
Fixes: 9a9d3abe24 ("ata: ahci: ceva: Update the driver to support xilinx GT phy")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The ASM1064 SATA host controller always reports wrongly,
that it has 24 ports. But in reality, it only has four ports.
before:
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
after:
ahci 0000:04:00.0: ASM1064 has only four ports
ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The naming format of the board_ahci_no* boards are:
board_ahci_no_debounce_delay
board_ahci_pcs_quirk_no_devslp
board_ahci_pcs_quirk_no_sntf
Rename board_ahci_nomsi to board_ahci_no_msi to match the other boards.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Since commit 66a7cbc303 ("ahci: disable MSI instead of NCQ on Samsung
pci-e SSDs on macbooks") there is not a single entry in ahci_pci_tbl
which uses board_ahci_noncq.
Since this is dead code, let's remove it.
We cannot remove AHCI_HFLAG_NO_NCQ, as this flag is still used by other
boards.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Most quirks are applied using a specific board type board_ahci_no*
(e.g. board_ahci_nomsi, board_ahci_noncq), which then sets a flag
representing the specific quirk.
ahci_pci_tbl (which is the table of all supported PCI devices), then
uses that board type for the PCI vendor and device IDs which need to
be quirked.
The ahci_broken_devslp quirk is not implemented in this standard way.
Modify the ahci_broken_devslp quirk to be implemented like the other
quirks. This way, we will not have the same PCI device and vendor ID
scattered over ahci.c. It will simply be defined in a single location.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit 7edbb60592 ("ahci: clean up intel_pcs_quirk") added a new board
type (board_ahci_pcs_quirk) which applies the Intel PCS quirk for legacy
platforms. However, it also modified board_ahci_avn and board_ahci_nosntf
to apply the same quirk.
board_ahci_avn is defined under the label:
/* board IDs for specific chipsets in alphabetical order */
This is a board for a specific chipset, so the naming is perfectly fine.
(The name does not need to be suffixed with _pcs_quirk, since all
controllers for this chipset require the quirk to be applied).
board_ahci_nosntf is defined under the label:
/* board IDs by feature in alphabetical order */
This is a board for a specific feature/quirk. However, it is used to
apply two different quirks.
Rename board_ahci_nosntf to more clearly highlight that this board ID
applies two different quirks.
Fixes: 7edbb60592 ("ahci: clean up intel_pcs_quirk")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
In ata ata_dev_power_set_standby(), check that the target device is not
sleeping. If it is, there is no need to do anything.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The comment in front of board_ahci_pcs7 is completely wrong.
It claims that board_ahci_pcs7 is needing the quirk, but in fact,
the logic implemented in ahci_intel_pcs_quirk() is the exact opposite,
only board_ahci_pcs7 is _excluded_ from the quirk.
This way of implementing a quirk is unconventional in several ways:
First of all because it has a board ID for which the quirk should _not_ be
applied (board_ahci_pcs7), instead of the usual way where we have a board
ID for which the quirk should be applied.
The second reason is that other than only excluding board_ahci_pcs7 from
the quirk, PCI devices that make use of the generic entry in ahci_pci_tbl
(which matches on AHCI class code) are also excluded.
This can of course lead to very subtle breakage, and did indeed do so in:
commit 104ff59af7 ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"),
which added an explicit entry with board_ahci_low_power to ahci_pci_tbl.
This caused many users to complain that their SATA drives disappeared.
The logical assumption was of course that the issue was related to LPM,
and was therefore reverted in commit 6210038aea ("ata: ahci: Revert
"ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"").
It took a lot of time to figure out that this was all completely unrelated
to LPM, and was instead caused by an unconventional Intel quirk.
Clean up the quirk so that it behaves like other quirks, i.e. define a
board where the quirk is applied. Platforms that were using
board_ahci_pcs7 are converted to use board_ahci, this is safe since the
boards were identical, and board_ahci_pcs7 did not define any custom
port_ops.
This way, new Intel platforms can be added using the correct "board_ahci"
board, without getting any unexpected quirks applied.
This means that we currently have some modern platforms defined that are
using the Intel PCS quirk, but that is identical to the behavior that
was there before this commit.
No functional changes intended.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The low power policy board type was introduced to allow systems
to get into deep states reliably. Before it was introduced `min_power`
was causing problems for a number of drives. New power policies
`min_power_with_partial` and `med_power_with_dipm` have been introduced
which provide a more stable baseline for systems.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[cassel: rebase patch and fix trivial conflicts]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
AHCI 1.3.3, 7.3.1.1 Software Flow for Hot Plug Removal Detection states:
"To reliably detect hot plug removals, software must disable interface
power management.
Software should perform the following initialization on a port after a
device is attached:
-Set PxSCTL.IPM to 3h to disable interface power management state
transitions.
-Set PxCMD.ALPE to ‘0’ to disable aggressive power management.
-Ensure PxIE.PRCE is set to ‘1’ to enable interrupts on hot plug removals.
-Disable device initiated interface power management by issuing the
appropriate SET FEATURES command."
Further, AHCI 1.3.3, 7.3 Native Hot Plug Support states:
"The HBA shall set the PxSERR.DIAG.X bit to ‘1’ when a COMINIT is received
from the device. Hot plug insertions are detected via the PxIS.PCS bit
that directly reflects the PxSERR.DIAG.X bit. The HBA shall set the
PxSERR.DIAG.N bit to ‘1’ when the HBA’s internal PhyRdy signal changes
state.
Hot plug removals are detected via the PxIS.PRCS bit that directly
reflects the PxSERR.DIAG.N bit. Note that PxSERR.DIAG.N is also set
to ‘1’ on insertions and during interface power management entry/exit."
ahci_set_lpm() already disables the PxIS.PRCS interrupt if setting a
LPM policy != ATA_LPM_MAX_POWER, so we cannot detect hot plug removals
when LPM policy != ATA_LPM_MAX_POWER.
We do have PxIS.PCS interrupt enabled even for LPM policy !=
ATA_LPM_MAX_POWER, so we should theoretically still be able to detect
hot plug insertions even when LPM is enabled.
However, in practise, for LPM policy ATA_LPM_MED_POWER_WITH_DIPM,
ATA_LPM_MIN_POWER_WITH_PARTIAL, and ATA_LPM_MIN_POWER, if there is
no link enabled, sata_link_scr_lpm() will set SControl.DET = 0x4,
which will transition the port to the "P:Offline" state.
The P:Offline mode is described in SATA Gold 3.5a:
4.1.1.103 Phy offline:
"In this mode the host Phy is forced off and the host Phy does not
recognize nor respond to COMINIT or COMWAKE. This mode is entered by
setting the DET field of the SControl register to 0100b. This is a
mechanism for the host to turn off its Phy."
So in the P:Offline state the PHY does not recognize the unsolicited
COMINIT which is sent on a hot plug insertion.
While we could change sata_link_scr_lpm() to never power off an external
port for LPM policy != ATA_LPM_MAX_POWER (in order be able to handle hot
plug insertions), we still would not be able to handle hot plug removals.
Thus, simply modify ahci_update_initial_lpm_policy() to not enable LPM if
the port advertises itself as an external port, as this function is
already being used to set/override the initial LPM policy.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
There is no need for ahci_update_initial_lpm_policy() to take hpriv as a
parameter, it can easily be derived from the ata_port.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
A hotplug capable port is an external port, so mark it as such.
We even say this ourselves in libata-scsi.c:
/* set scsi removable (RMB) bit per ata bit, or if the
* AHCI port says it's external (Hotplug-capable, eSATA).
*/
This also matches the terminology used in AHCI 1.3.1
(the keyword to search for is "externally accessible").
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Move the marking of an external port earlier in the call chain.
This is needed for further cleanups.
No functional change intended.
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the pata_parport_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
ASMedia have confirmed that all ASM106x parts currently listed in
ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran
into on the ASM1061, and therefore, we need to apply the quirk added by
commit 20730e9b27 ("ahci: add 43-bit DMA address quirk for ASMedia
ASM1061 controllers") to the other supported ASM106x parts as well.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: add link to ASMedia confirmation email]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an
ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was
observed that was immediately preceded by the following kernel
messages:
ahci 0000:28:00.0: Using 64-bit DMA addresses
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000]
The first message is produced by code in drivers/iommu/dma-iommu.c
which is accompanied by the following comment that seems to apply:
/*
* Try to use all the 32-bit PCI addresses first. The original SAC vs.
* DAC reasoning loses relevance with PCIe, but enough hardware and
* firmware bugs are still lurking out there that it's safest not to
* venture into the 64-bit space until necessary.
*
* If your device goes wrong after seeing the notice then likely either
* its driver is not setting DMA masks accurately, the hardware has
* some inherent bug in handling >32-bit addresses, or not all the
* expected address bits are wired up between the device and the IOMMU.
*/
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual
address 0xffffffff00000000 produces the following I/O page faults:
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010]
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010]
Note that the upper 21 bits of the logged DMA address are zero. (When
asking a different PCIe device in the same PCIe slot to DMA to the
same I/O virtual address, we do see all the upper 32 bits of the DMA
address as 1, so this is not an issue with the chipset or IOMMU
configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA
addresses to 1 produces no discernible effect on the behavior of the
ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address
limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia
parts as well, but we limit it to the PCI IDs known to refer to
ASM1061 parts, as that's the only part we know for sure to be affected
by this issue at this point.
Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: drop date from error messages in commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The ASM1166 SATA host controller always reports wrongly,
that it has 32 ports. But in reality, it only has six ports.
This seems to be a hardware issue, as all tested ASM1166
SATA host controllers reports such high count of ports.
Example output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode.
By adjusting the port_map, the count is limited to six ports.
New output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0x3f impl SATA mode.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays
as "max_performance" in sysfs.
This is quite misleading as they are not the same.
For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all,
leaving the configuration in unknown state.
For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the
policy to ATA_LPM_MAX_POWER.
This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig:
0 => Keep firmware settings
1 => Maximum performance
Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality.
While at it, update libata.h to mention that the ascii descriptions
are in libata-sata.c and not in libata-scsi.c.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
- Cleanup the pxa PATA driver to use dma_request_chan() instead of the
deprecated dma_request_slave_channel().
- Add Niklas as co-maintainer of the ata subsystem.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZZSeaAAKCRDdoc3SxdoY
dhLCAP42Oxs1RRHGKm7XD/N2jni2hPlurV436xIwMOS1TsBabgD/RzvD1amJrmtS
6aOfldVaPQiPiVo7C3f8vGhfTFZZ9AM=
=+Wjy
-----END PGP SIGNATURE-----
Merge tag 'ata-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Cleanup the pxa PATA driver to use dma_request_chan() instead of the
deprecated dma_request_slave_channel().
- Add Niklas as co-maintainer of the ata subsystem.
* tag 'ata-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
MAINTAINERS: Add Niklas Cassel as libata maintainer
ata: pata_pxa: convert not to use dma_request_slave_channel()
3 small fixes, one in drivers. The core changes are to the internal
representation of flags in scsi_devices which removes space wasting
bools in favour of single bit flags and to add a flag to force a
runtime resume which is used by ATA devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZWjFkSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheG9AP9CIjOP
8g3+RCnysbYlctJBsacaLyq9kROyaOY7dnKudQEArMGZ609afSXYrHGzBCtQ8F6T
Cvge1QVk00Bu4tKvA6Y=
=2Q9R
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, one in drivers.
The core changes are to the internal representation of flags in
scsi_devices which removes space wasting bools in favour of single bit
flags and to add a flag to force a runtime resume which is used by ATA
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix system start for ATA devices
scsi: Change SCSI device boolean fields to single bit flags
scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode
It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.
Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.
Fixes: 9131bff6a9 ("scsi: core: pm: Only runtime resume if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.
Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.
Fixes: 3cc2ffe5c1 ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dma_request_slave_channel() is deprecated. dma_request_chan() should
be used directly instead.
Switch to the preferred function and update the error handling accordingly.
While at it, also propagate the error code that is now available.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add missing error return check for devm_ioport_map() and return the
error if this function call fails.
Fixes: 0d5ff56677 ("libata: convert to iomap")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and so slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __ref which is
needed to suppress a (W=1) modpost warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This reverts commit 5b6fba546d.
Commit 5b6fba546d ("ata: libata-core: Detach a port devices on
shutdown") modified the function ata_pci_shutdown_one() to stop
(suspend) devices attached to the ports of a PCI AHCI adapter to ensure
that drives are spun down before shutting down a system. However, this
is done only for PCI adapters and not for other types of adapters. This
limitation was addressed with commit 24eca2dce0 ("scsi: sd: Introduce
manage_shutdown device flag"). With this, all ATA disks are spun down on
system shutdown, which make the changes introduced with 5b6fba546d
useless.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
- Modify the AHCI driver to print the link power management policy used
on scan, to help with debugging issues (Niklas).
- Add support for the ASM2116 series adapters to the AHCI driver
(Szuying).
- Prepare libata for the coming gcc and Clang __counted_by attribute
(Kees).
- Following the recent estensive fixing of libata suspend/resume
handling, several patches further cleanup and improve disk power state
management (from me).
- Reduce the verbosity of some error messages for non-fatal temporary
errors, e.g. slow response to device reset when scanning a port, and
warning messages that are in fact normal, e.g. disabling a device
on suspend or when removing it (from me).
- Cleanup DMA helper functions (from me).
- Fix sata_mv drive handling of potential errors durring probe (Ma).
- Cleanup the xgene and imx drivers using the functions
of_device_get_match_data() and device_get_match_data() (Rob).
- Improve the tegra driver device tree (Rob).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZT9PtwAKCRDdoc3SxdoY
diCGAQCbSOB3PCpsm1cCMevZeEbt+zUSx+sj6twR12RohtQK6wEA1rEytQllZyqa
Pk/jIH2UYZaf+lVuV3Vbey4rwDYXTQs=
=V53T
-----END PGP SIGNATURE-----
Merge tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Modify the AHCI driver to print the link power management policy used
on scan, to help with debugging issues (Niklas)
- Add support for the ASM2116 series adapters to the AHCI driver
(Szuying)
- Prepare libata for the coming gcc and Clang __counted_by attribute
(Kees)
- Following the recent estensive fixing of libata suspend/resume
handling, several patches further cleanup and improve disk power
state management (me)
- Reduce the verbosity of some error messages for non-fatal temporary
errors, e.g. slow response to device reset when scanning a port, and
warning messages that are in fact normal, e.g. disabling a device on
suspend or when removing it (me)
- Cleanup DMA helper functions (me)
- Fix sata_mv drive handling of potential errors durring probe (Ma)
- Cleanup the xgene and imx drivers using the functions
of_device_get_match_data() and device_get_match_data() (Rob)
- Improve the tegra driver device tree (Rob)
* tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits)
dt-bindings: ata: tegra: Disallow undefined properties
ata: libata-core: Improve ata_dev_power_set_active()
ata: libata-eh: Spinup disk on resume after revalidation
ata: imx: Use device_get_match_data()
ata: xgene: Use of_device_get_match_data()
ata: sata_mv: aspeed: fix value check in mv_platform_probe()
ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
ata: libata: Cleanup inline DMA helper functions
ata: libata-eh: Reduce "disable device" message verbosity
ata: libata-eh: Improve reset error messages
ata: libata-sata: Improve ata_sas_slave_configure()
ata: libata-core: Do not resume runtime suspended ports
ata: libata-core: Do not poweroff runtime suspended ports
ata: libata-core: Remove ata_port_resume_async()
ata: libata-core: Remove ata_port_suspend_async()
ata: libata-core: Detach a port devices on shutdown
ata: libata-core: Synchronize ata_port_detach() with hotplug
ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
scsi: Remove scsi device no_start_on_resume flag
ata: libata: Annotate struct ata_cpr_log with __counted_by
...
Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") change setting the manage_system_start_stop
flag to false for libata managed disks to enable libata internal
management of disk suspend/resume. However, a side effect of this change
is that on system shutdown, disks are no longer being stopped (set to
standby mode with the heads unloaded). While this is not a critical
issue, this unclean shutdown is not recommended and shows up with
increased smart counters (e.g. the unexpected power loss counter
"Unexpect_Power_Loss_Ct").
Instead of defining a shutdown driver method for all ATA adapter
drivers (not all of them define that operation), this patch resolves
this issue by further refining the sd driver start/stop control of disks
using the new flag manage_shutdown. If this new flag is set to true by
a low level driver, the function sd_shutdown() will issue a
START STOP UNIT command with the start argument set to 0 when a disk
needs to be powered off (suspended) on system power off, that is, when
system_state is equal to SYSTEM_POWER_OFF.
Similarly to the other manage_xxx flags, the new manage_shutdown flag is
exposed through sysfs as a read-write device attribute.
To avoid any confusion between manage_shutdown and
manage_system_start_stop, the comments describing these flags in
include/scsi/scsi.h are also improved.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218038
Link: https://lore.kernel.org/all/cd397c88-bf53-4768-9ab8-9d107df9e613@gmail.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve the function ata_dev_power_set_active() by having it do nothing
for a disk that is already in the active power state. To do that,
introduce the function ata_dev_power_is_active() to test the current
power state of the disk and return true if the disk is in the PM0:
active or PM1: idle state (0xff value for the count field of the CHECK
POWER MODE command output).
To preserve the existing behavior, if the CHECK POWER MODE command
issued in ata_dev_power_is_active() fails, the drive is assumed to be in
standby mode and false is returned.
With this change, issuing the VERIFY command to access the disk media to
spin it up becomes unnecessary most of the time during system resume as
the port reset done by libata-eh on resume often result in the drive to
spin-up (this behavior is not clearly defined by the ACS specifications
and may thus vary between disk models).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Move the call to ata_dev_power_set_active() to transition a disk in
standby power mode to the active power mode from
ata_eh_revalidate_and_attach() before doing revalidation to the end of
ata_eh_recover(), after the link speed for the device is reconfigured
(if that was necessary). This is safer as this ensure that the VERIFY
command executed to spinup the disk is executed with the drive properly
reconfigured first.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Use preferred of_device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
In mv_platform_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
fit3 protocol driver does not support accessing IDE control registers
(device control/altstatus). The DOS driver does not use these registers
either (as observed from DOSEMU trace). But the HW seems to be capable
of accessing these registers - I simply tried bit 3 and it works!
The control register is required to properly reset ATAPI devices or
they will be detected only once (after a power cycle).
Tested with EXP Computer CD-865 with MC-1285B EPP cable and
TransDisk 3000.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the
detection to always fail. Fix it.
Fixes: 246a1c4c6b ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Intel Alder Lake-P AHCI controller needs to be added to the mobile
chipsets list in order to have link power management enabled. Without
this the CPU cannot enter lower power C-states making idle power
consumption high.
Cc: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
There is no point in warning about a device being disabled when we
expect it to be, that is, on suspend, shutdown or when detaching the
device.
Suppress the message "disable device" for these cases by introducing the
EH static function ata_eh_dev_disable() and by using it in
ata_eh_unload() and ata_eh_detach_dev(). ata_dev_disable() code is
modified to call this new function after printing the "disable device"
message.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Some drives are really slow to spinup on resume, resulting is a very
slow response to COMRESET and to error messages such as:
ata1: COMRESET failed (errno=-16)
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
Given that the slowness of the response is indicated with the message
"link is slow to respond..." and that resets are retried until the
device is detected as online after up to 1min (ata_eh_reset_timeouts),
there is no point in printing the "COMRESET failed" error message. Let's
not scare the user with non fatal errors and only warn about reset
failures in ata_eh_reset() when all reset retries have been exhausted.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Change ata_sas_slave_configure() to return the return value of
ata_scsi_dev_config() to ensure that any error from that function is
propagated to libsas.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The scsi disk driver does not resume disks that have been runtime
suspended by the user. To be consistent with this behavior, do the same
for ata ports and skip the PM request in ata_port_pm_resume() if the
port was already runtime suspended. With this change, it is no longer
necessary to force the PM state of the port to ACTIVE as the PM core
code will take care of that when handling runtime resume.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
When powering off, there is no need to suspend a port that has already
been runtime suspended. Skip the EH PM request in ata_port_pm_poweroff()
in this case.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove ata_port_resume_async() and replace it with a modified
ata_port_resume() taking an additional bool argument indicating if
ata EH resume operation should be executed synchronously or
asynchronously. With this change, the variable ata_port_resume_ehi is
not longer necessary and its value (ATA_EHI_XXX flags) passed directly
to ata_port_request_pm().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
ata_port_suspend_async() is only called by ata_sas_port_suspend().
Modify ata_port_suspend() with an additional bool argument indicating an
asynchronous or synchronous suspend to allow removing that helper
function. With this change, the variable ata_port_resume_ehi can also be
removed and its value (ATA_EHI_XXX flags passed directly to
ata_port_request_pm().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify ata_pci_shutdown_one() to schedule EH to unload a port devices
before freezing and thawing the port. This ensures that drives are
cleanly disabled and transitioned to standby power mode when
a PCI adapter is removed or the system is powered off.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The call to async_synchronize_cookie() to synchronize a port removal
and hotplug probe is done in ata_host_detach() right before calling
ata_port_detach(). Move this call at the beginning of ata_port_detach()
to ensure that this operation is always synchronized with probe.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that libata does its own internal device power mode management
through libata EH, the scsi disk driver will not issue START STOP UNIT
commands anymore. We can receive this command only from user passthrough
operations. So there is no need to consider the system state and ATA
port flags for suspend to translate the command.
Since setting up the taskfile for the verify and standby
immediate commands is the same as done in ata_dev_power_set_active()
and ata_dev_power_set_standby(), factor out this code into the helper
function ata_dev_power_init_tf() to simplify ata_scsi_start_stop_xlat()
as well as ata_dev_power_set_active() and ata_dev_power_set_standby().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for PCIe SATA adapter cards based on Asmedia 2116 controllers.
These cards can provide up to 10 SATA ports on PCIe card.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The target LPM policy can be set using either a Kconfig or a kernel module
parameter.
However, if the board type is set to anything but board_ahci_low_power,
then the LPM policy will overridden and set to ATA_LPM_UNKNOWN.
Additionally, if the default suspend is suspend to idle, depending on the
hardware capabilities of the HBA, ahci_update_initial_lpm_policy() might
override the LPM policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or
ATA_LPM_MIN_POWER.
All this means that it is very hard to know which LPM policy a user will
actually be using on a given system.
In order to make it easier to debug LPM related issues, print the LPM
policy on boot.
One common LPM related issue is that the device fails to link up.
Because of that, we cannot add this print to ata_dev_configure(), as that
function is only called after a successful link up. Instead, add the info
using ata_port_desc(), with the help of a new ata_port_desc_misc() helper.
The port description is printed once per port during boot.
Before changes:
ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170
ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170
After changes:
ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 lpm-pol 4
ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 lpm-pol 4
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more details:
- Add missing additionalProperties on child nodes to the pata-common DT
bindings (Rob).
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas).
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias).
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me).
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk driver
resume operation not being synchronized with libata EH port resume
handling. This is addressed by changing the scsi disk driver disk
start/stop control to allow libata to execute disk suspend (spin
down) and resume (spin up) on its own during system suspend/resume.
Runtime suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races.
- Establish a link between ATA ports and SCSI devices to order PM
operations.
- Fix device removal to avoid issues with driver rmmod removal.
- Fix synchronization of libata device rescan and SCSI disk resume
operation.
- Remove libsas PM operations as suspend/resume is handled directly
by the sas controller resume.
- Fix the SCSI disk driver to not issue commands to suspended disks,
thus avoiding potential system lock-up on resume.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZRbR0gAKCRDdoc3SxdoY
dkArAP9PFTRgsXEwfE7arBXCwQqXj/W0R2KgKug7Fno+SoQLnAD/ZKe2TR50uwxr
9mwYROdMgi50T9ax1RX1jWA0npGXmQg=
=cFzG
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c8 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
not atomic and a suspend PM event may be triggered between them,
casuing scsi_rescan_device() to be called on a suspended device and
in that function blocking while holding the scsi device lock. This
would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:
for (( i=0; i<10; i++ )); do
echo "+2 > /sys/class/rtc/rtc0/wakealarm
echo mem > /sys/power/state
done
that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.
Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.
Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.
For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.
However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.
Commit 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.
Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.
To do this, the following libata helper functions are introduced:
1) ata_dev_power_set_standby():
This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.
For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.
2) ata_dev_power_set_active() and
This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.
For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.
With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620 ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef4108291 ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not. Reduce the problems of
incorrectly using CDL commands on older devices by checking SCSI spec
compliance at SPC-5 (the spec which introduced the command) before
turning on CDL.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZRQglCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYJdAP4rjE8a
/X3Vs7C0PoFDl6HlkN3w4Eeq54vLMmxNez2tywEA6cB3RdwG58g34p8wBt7Lb6UI
1HAIhRub2mpHZyQH0/U=
=qq6Q
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not.
Reduce the problems of incorrectly using CDL commands on older devices
by checking SCSI spec compliance at SPC-5 (the spec which introduced
the command) before turning on CDL"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: ata: Do no try to probe for CDL on old drives
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b20309428 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not
seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES
commands correctly and hang when a non-zero service action is specified
(one command format with service action case in scsi_report_opcode()).
Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a
non zero service action for scsi_report_opcode(). To avoid issues with
these old drives, do not attempt CDL probe if the device reports support
for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep
things working with ATA devices which probe for the CDL T2A and T2B pages
introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version
compatibility for ATA drives supporting CDL.
SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix
scsi_probe_lun() to correctly capture this value by changing the bit mask
for the second byte of the INQUIRY response from 0x7 to 0xf.
include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the
value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and
SCSI_SPC_5 versions are also added.
Reported-by: John David Anglin <dave.anglin@bell.net>
Fixes: 624885209f ("scsi: core: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org
Tested-by: David Gow <david@davidgow.net>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, we fetch sense data for a _successful_ command if either:
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
This means that case 2) will trigger for a non-NCQ command which has
ATA_SENSE bit set, regardless if CDL is enabled or not.
This decision was by design. If the device reports that it has sense data
available, it makes sense to fetch that sense data, since the sk/asc/ascq
could be important information regardless if CDL is enabled or not.
However, the fetching of sense data for a successful command is done via
ATA EH. Considering how intricate the ATA EH is, we really do not want to
invoke ATA EH unless absolutely needed.
Before commit 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL
commands using policy 0xD") we never fetched sense data for successful
commands.
In order to not invoke the ATA EH unless absolutely necessary, even if the
device claims support for sense data reporting, only fetch sense data for
successful (NCQ and non-NCQ commands) commands that are using CDL.
[Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL
instead of the device support for CDL, which is implied for commands
using CDL.
Fixes: 3ac873c76d ("ata: libata-core: fix when to fetch sense data for successful commands")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
commit 1e641060c4 ("libata: clear eh_info on reset completion") added
a workaround that broke the retry mechanism in ATA EH.
Tejun himself suggested to remove this workaround when it was identified
to cause additional problems:
https://lore.kernel.org/linux-ide/20110426135027.GI878@htj.dyndns.org/
He even said:
"Hmm... it seems I wasn't thinking straight when I added that work around."
https://lore.kernel.org/linux-ide/20110426155229.GM878@htj.dyndns.org/
While removing the workaround solved the issue, however, the workaround was
kept to avoid "spurious hotplug events during reset", and instead another
workaround was added on top of the existing workaround in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Because these IRQs happened when the port was frozen, we know that they
were actually a side effect of PxIS and IS.IPS(x) not being cleared before
the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear
pending interrupt status"), so these workarounds can now be removed.
Since commit 1e641060c4 ("libata: clear eh_info on reset completion") has
now been reverted, the ATA EH retry mechanism is functional again, so there
is once again no need to thaw the port more than once in ata_eh_reset().
This reverts "the workaround on top of the workaround" introduced in commit
8c56cacc72 ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3 ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
When a CRC error occurs, the HBA asserts an interrupt to indicate an
interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then
does error recovery. If the adapter receives another SDB FIS
with an error (PxIS.TFES) from the device before the start of the EH
recovery process, the interrupt signaling the new SDB cannot be
serviced as PxIE was cleared already. This in turn results in the HBA
inability to issue any command during the error recovery process after
setting PxCMD.ST to 1 because PxIS.TFES is still set.
According to AHCI 1.3.1 specifications section 6.2.2, fatal errors
notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will
cause the HBA to enter the ERR:Fatal state. In this state, the HBA
shall not issue any new commands.
To avoid this situation, introduce the function
ahci_port_clear_pending_irq() to clear pending interrupts before
executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2
specification.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Fixes: e0bfd14997 ("[PATCH] ahci: stop engine during hard reset")
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
snprintf() returns the "number of characters which *would* be generated for
the given input", not the size *really* generated.
In order to avoid too large values for 'o' (and potential negative values
for "sizeof(linebuf) o") use scnprintf() instead of snprintf().
Note that given the "w < 4" in the for loop, the buffer can NOT
overflow, but using the *right* function is always better.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."
In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."
Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.
DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.
sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.
This change is based on a patch originally submitted by Runa Guo-oc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Fixes: 1152b2617a ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Mostly small stragglers that missed the initial merge. Driver updates
are qla2xxx and smartpqi (mp3sas has a high diffstat due to the
volatile qualifier removal, fnic due to unused function removal and
sd.c has a lot of code shuffling to remove forward declarations).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZPyD4CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZWGAQDlh/3q
5YJp7f8sIqmgdOiKl3bln3API9Y0MPsC3z5TsAEAv9LYQZH3He4XvxMy/v5FioEs
8IWIoBsUZtcgoK6mI4w=
=8Aj8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.
Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
due to the volatile qualifier removal, fnic due to unused function
removal and sd.c has a lot of code shuffling to remove forward
declarations)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
scsi: mpt3sas: Remove volatile qualifier
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
scsi: libsas: Simplify sas_queue_reset() and remove unused code
scsi: ufs: Fix the build for the old ARM OABI
scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
scsi: fnic: Replace sgreset tag with max_tag_id
scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
scsi: smartpqi: Change driver version to 2.1.24-046
scsi: smartpqi: Enhance error messages
scsi: smartpqi: Enhance controller offline notification
scsi: smartpqi: Enhance shutdown notification
scsi: smartpqi: Simplify lun_number assignment
scsi: smartpqi: Rename pciinfo to pci_info
scsi: smartpqi: Rename MACRO to clarify purpose
scsi: smartpqi: Add abort handler
...
- Fix OF include file for ata platform drivers (Rob).
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao).
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey).
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas).
- Remove functions intended for libsas that are in fact unused
(Niklas).
- Change the remove device callback of platform drivers to a null
function (Uwe).
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li).
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert).
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me).
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael).
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner).
- Disable NCQ trim on Micron 1100 drives (Pawel).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZPbUdQAKCRDdoc3SxdoY
du6NAP9G10EhjgXDNIM8f1AN8gHrZk2RGSxSuqIKKROxl2i+ugD+Mt8/UjRpf0JO
nVdKTfgeXaLfCXHN/fmkIYNmk+I7Twg=
=9Ety
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Fix OF include file for ata platform drivers (Rob)
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao)
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey)
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas)
- Remove functions intended for libsas that are in fact unused (Niklas)
- Change the remove device callback of platform drivers to a null
function (Uwe)
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li)
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert)
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me)
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael)
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner)
- Disable NCQ trim on Micron 1100 drives (Pawel)
* tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits)
ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives
ata: ahci: Add Elkhart Lake AHCI controller
ata: pata_falcon: add data_swab option to byte-swap disk data
ata: pata_falcon: fix IO base selection for Q40
ata: pata_ep93xx: use soc_device_match for UDMA modes
ata: pata_ep93xx: fix error return code in probe
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
m68k: Remove <asm/ide.h>
ata: pata_gayle: Remove #include <asm/ide.h>
ata: pata_falcon: Remove #include <asm/ide.h>
ata: pata_buddha: Remove #include <asm/ide.h>
asm-generic: Remove ide_iops.h
sparc: Remove <asm/ide.h>
powerpc: Remove <asm/ide.h>
parisc: Remove <asm/ide.h>
ARM: Remove <asm/ide.h>
ata: pata_imx: Use helper function devm_clk_get_enabled()
ata: sata_rcar: Convert to platform remove callback returning void
ata: sata_mv: Convert to platform remove callback returning void
...
Micron 1100 drives lock up when encountering queued TRIM command. It is
a quite old hardware series, for past years we have been running our
machines with these drives using libata.force=noncqtrim.
[Damien] Move the "Crucial_CT*M500*" entry to keep Micron and Crucial
entries together.
Signed-off-by: Pawel Zmarzly <pzmarzly@meta.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Elkhart Lake is the successor of Apollo Lake and Gemini Lake. These
CPUs and their PCHs are used in mobile and embedded environments.
With this patch I suggest that Elkhart Lake SATA controllers [1] should
use the default LPM policy for mobile chipsets.
The disadvantage of missing hot-plug support with this setting should
not be an issue, as those CPUs are used in embedded environments and
not in servers with hot-plug backplanes.
We discovered that the Elkhart Lake SATA controllers have been missing
in ahci.c after a customer reported the throttling of his SATA SSD
after a short period of higher I/O. We determined the high temperature
of the SSD controller in idle mode as the root cause for that.
Depending on the used SSD, we have seen up to 1.8 Watt lower system
idle power usage and up to 30°C lower SSD controller temperatures in
our tests, when we set med_power_with_dipm manually. I have provided a
table showing seven different SATA SSDs from ATP, Intel/Solidigm and
Samsung [2].
Intel lists a total of 3 SATA controller IDs (4B60, 4B62, 4B63) in [1]
for those mobile PCHs.
This commit just adds 0x4b63 as I do not have test systems with 0x4b60
and 0x4b62 SATA controllers.
I have tested this patch with a system which uses 0x4b63 as SATA
controller.
[1] https://sata-io.org/product/8803
[2] https://www.thomas-krenn.com/en/wiki/SATA_Link_Power_Management#Example_LES_v4
Signed-off-by: Werner Fischer <devlists@wefi.net>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Some users of pata_falcon on Q40 have IDE disks in default
IDE little endian byte order, whereas legacy disks use
host-native big-endian byte order as on the Atari Falcon.
Add module parameter 'data_swab' to allow connecting drives
with non-native data byte order. Drives selected by the
data_swap bit mask will have their user data byte-swapped to
host byte order, i.e. 'pata_falcon.data_swab=2' will byte-swap
all user data on drive B, leaving data on drive A in native
byte order. On Q40, drives on a second IDE interface may be
added to the bit mask as bits 2 and 3.
Default setting is no byte swapping, i.e. compatibility with
the native Falcon or Q40 operating system disk format.
Cc: William R Sowerbutts <will@sowerbutts.com>
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: William R Sowerbutts <will@sowerbutts.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
With commit 44b1fbc0f5 ("m68k/q40: Replace q40ide driver
with pata_falcon and falconide"), the Q40 IDE driver was
replaced by pata_falcon.c.
Both IO and memory resources were defined for the Q40 IDE
platform device, but definition of the IDE register addresses
was modeled after the Falcon case, both in use of the memory
resources and in including register shift and byte vs. word
offset in the address.
This was correct for the Falcon case, which does not apply
any address translation to the register addresses. In the
Q40 case, all of device base address, byte access offset
and register shift is included in the platform specific
ISA access translation (in asm/mm_io.h).
As a consequence, such address translation gets applied
twice, and register addresses are mangled.
Use the device base address from the platform IO resource
for Q40 (the IO address translation will then add the correct
ISA window base address and byte access offset), with register
shift 1. Use MMIO base address and register shift 2 as before
for Falcon.
Encode PIO_OFFSET into IO port addresses for all registers
for Q40 except the data transfer register. Encode the MMIO
offset there (pata_falcon_data_xfer() directly uses raw IO
with no address translation).
Reported-by: William R Sowerbutts <will@sowerbutts.com>
Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Fixes: 44b1fbc0f5 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide")
Cc: stable@vger.kernel.org
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: William R Sowerbutts <will@sowerbutts.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Replace ep93xx_chip_revision() with soc_device_match(), so
ep93xx_chip_revision() can be safetly dropped from exported functions.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Return -ENOMEM from ep93xx_pata_probe() if devm_kzalloc() or
ata_host_alloc() fails.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Most callers of scsi_rescan_device() have the scsi_device pointer readily
available. Pass a struct scsi_device pointer to scsi_rescan_device()
instead of a struct device pointer. This change prevents that a pointer to
another struct device would be passed accidentally to scsi_rescan_device().
Remove the scsi_rescan_device() declaration from the scsi_priv.h header
file since it duplicates the declaration in <scsi/scsi_host.h>.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230822153043.4046244-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the missing MODULE_DESCRIPTION() to avoid warnings such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/sata_gemini.o
when compiling with W=1.
Fixes: be4e456ed3 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing MODULE_DESCRIPTION() to avoid warnings such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_ftide010.o
when compiling with W=1.
Fixes: be4e456ed3 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The Amiga Gayle PATA driver does not need anything from <asm/ide.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The Atari Falcon PATA driver does not need anything from <asm/ide.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The Buddha, Catweasel, and X-Surf PATA driver does not need anything
from <asm/ide.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
After the commit 7ef9651e97 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), the pair of functions devm_clk_get() and
clk_prepare_enable() can be replaced with the single function
devm_clk_get_enabled(). Moreover, the driver will keep the clock
prepared (or enabled) during the whole lifetime of the device, so it is
unnecessary to unprepare and disable the clock explicitly when removing
the device or in the error handling path.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Now that all libata drivers have migrated to use the error_handler
callback, remove the deprecated phy_reset and eng_timeout callbacks.
Also remove references to non-existent functions sata_phy_reset and
ata_qc_timeout from Documentation/driver-api/libata.rst.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Remove ata_bus_probe() as it is unused.
Also, remove references to ata_bus_probe and port_disable in
Documentation/driver-api/libata.rst, as neither exist anymore.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The TODO claims that the pdc_20621_ops should set the .inherits
function pointer to &ata_base_port_ops after it has been converted
to use the new EH.
However, the driver was converted to use the new EH a long time ago,
in commit 67651ee571 ("[libata] sata_sx4: convert to new exception
handling methods"), which also did set .inherits function pointer to
&ata_sff_port_ops (and ata_sff_port_ops itself has .inherits set to
&ata_base_port_ops).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
ata_sas_port_init() now only contains a single initialization.
Move this single initialization to ata_sas_port_alloc(), since:
1) ata_sas_port_alloc() already initializes some of the struct members.
2) ata_sas_port_alloc() is only used by libsas.
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Rename __ata_port_probe() to ata_port_probe() and drop the wrapper
ata_sas_async_probe().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Just used in one place.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Damien Le Moal
Liao Chen
Niklas Cassel
Zhang Zekun
Gaosheng Cui
Zheng Qixing
Michael Ellerman
Dan Carpenter
Richard Zhu
Linus Torvalds
Dr. David Alan Gilbert
Igor Pylypiv
Christoph Hellwig
Mario Limonciello
Jason Nader
Heiner Kallweit
Sergey Shtylyov
Niklas Schnelle
Chen Ni
Arnd Bergmann
Christophe JAILLET
Krzysztof Kozlowski
Conrad Kostecki
Dawei Li
Radhey Shyam Pandey
Andrey Jr. Melnikov
Ricardo B. Marliere
Lennert Buytenhek
Uwe Kleine-König
Rob Herring
Ma Ke
Ondrej Zary
Mika Westerberg
Szuying Chen
Niklas Cassel
Pawel Zmarzly
Werner Fischer
Michael Schmitz
Nikita Shubin
Bart Van Assche
Geert Uytterhoeven
Li Zetao
Hannes Reinecke