3.1 KiB

Raw Blame History

WiFi Monitor Threshold Tuning - Quick Reference

GDB Commands

# View current thresholds
show_thresholds

# Preset profiles
tune_sensitive      # Catch more issues (stricter)
tune_normal         # Default settings
tune_relaxed        # Fewer false positives

# Individual thresholds
set_high_nav <us>              # High NAV threshold (default: 5000)
set_mismatch_log <us>          # Log when NAV exceeds (default: 10000)
set_rate_fallback <mbps>       # Rate fallback threshold (default: 100)
set_multiplier <n>             # Duration multiplier (default: 2)
set_log_rate <n>               # Log every Nth mismatch (default: 1)

Tunable Variables

Variable	Default	Description
`threshold_high_nav_us`	5000	NAV above this = "high"
`threshold_duration_mismatch_us`	10000	Log mismatches above this NAV
`threshold_phy_rate_fallback_mbps`	100	PHY rate below this = fallback
`threshold_duration_multiplier`	2	NAV > expected × this = mismatch
`threshold_retry_rate_percent`	20.0	Retry % for collapse
`threshold_avg_nav_collapse_us`	10000	Avg NAV for collapse
`threshold_collision_percent`	10.0	Collision % for collapse
`threshold_mismatch_percent`	5.0	Mismatch % for collapse
`log_every_n_mismatches`	1	Log every Nth (1=all, 10=every 10th)

Quick Examples

Too Much Logging

(gdb) set_log_rate 10          # Log every 10th mismatch
(gdb) set_mismatch_log 20000   # Only log >20ms NAV
(gdb) continue

Not Catching Issues

(gdb) tune_sensitive           # Use stricter thresholds
(gdb) continue

2.4GHz Network

(gdb) tune_relaxed             # More lenient
(gdb) set_rate_fallback 24     # 2.4GHz rates lower
(gdb) continue

5GHz High Performance

(gdb) tune_sensitive
(gdb) set_rate_fallback 200    # Expect >200 Mbps
(gdb) continue

Preset Profile Settings

Threshold	Sensitive	Normal	Relaxed
High NAV	3000 us	5000 us	10000 us
Mismatch log	5000 us	10000 us	20000 us
Rate fallback	150 Mbps	100 Mbps	50 Mbps
Multiplier	1.5x	2x	3x
Retry rate	15%	20%	30%

Installation

cd ~/Code/esp32/esp32-iperf

# Update files
cp wifi_monitor.c components/wifi_monitor/
cp .gdbinit .

# Build once
idf.py build
idf.py -p /dev/ttyACM0 flash

# Enable GDB auto-load (one-time)
mkdir -p ~/.config/gdb
echo "set auto-load safe-path /" >> ~/.config/gdb/gdbinit

Typical Workflow

# Start GDB
$ idf.py gdb

# Check defaults
(gdb) show_thresholds

# Start monitoring
(gdb) continue

# Adjust on the fly (Ctrl-C to pause)
(gdb) Ctrl-C
(gdb) set_log_rate 20
(gdb) continue

# Check effect, adjust again if needed
(gdb) Ctrl-C
(gdb) tune_sensitive
(gdb) continue

Benefits

✅ No rebuild - Adjust thresholds instantly
✅ Zero overhead - Full C code performance
✅ Live tuning - Change while running
✅ Experiment - Try different settings easily

For complete guide: See GDB_THRESHOLD_TUNING_GUIDE.md

3.1 KiB Raw Blame History Unescape Escape